12/19/2023 0 Comments Automotive two sided tape![]() Caution:Īvoid contact with eyes and skin. Store the product in a cool and dry place.Ģ4 months in ambient conditions. Colours:ĪNY OTHER COLOURS AVAILABLE SUBJECT TO QUANTITY. ![]() GOOD ADHESION ON BOTH FACES TO MOST BUILDING MATERIALSġmm to 35mm THICK, 5mm to 150mm wide.DIRECT CONTROL OVER QUANTITY OF SEALANT USED IN THE JOINT.RATE : INDEPENDENTLY TESTED TO BS 15106-3 MANY OTHER COLOURS AVAILABLE SUBJECT TO QUANTITY.ġmm to 35mm THICK, 5mm to 150mm wide. STANDARD COLOURS ARE BLACK, WHITE, AND GREY. ![]() HEATING & VENTILATION market has found this product to be preferable to other methods of sealing flanges on ducting due to its ease of use and solvent free formulation.ĪUTOMOTIVE uses include sealing around the frames of sun roofs.ĬARAVAN manufacturers have many applications such as sealing between mouldings and the outer skin, lap joints on the body work and other areas where fittings are attached piercing the outer skin.įIRE PROTECTION is enhanced by use of an intumescent version Bu-Tack 1 FR. A copy of the independent test report to the National Federation of Roofing Contractors (NFRC) specification is available on the STP website. ROOFING & CLADDING industry where it creates an excellent seal in situations such as side and end lap joints and the bead section is particularly recommended for large corrugated end lap sheet profiles. On forming the joint the release paper is removed and the closing surface pushed firmly in place, pressure applied along the length of the joint and mechanically fixed. The product should be unwound and lightly pressed into position leaving the release paper in place. For best performance the surfaces should be clean, dry, and grease free. Applications:īu-Tack 1 should be applied to surfaces at a temperature range of between +4✬ and +40✬. The product is cost effective, non-toxic and requires no tools to apply. This product has a multitude of applications where joints need to be formed to seal against air and water ingress. ![]() GLUEDEVIL BU-TACK 1 is a preformed high performance polyisobutylene (PIB) based sealing tape available in single strand or multi-lane rolls. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |